==== Start (Coova)-Chilli ====

<code>
root@raspberrypi:/etc/chilli# /etc/init.d/chilli start
Starting chilli: 
root@raspberrypi:/etc/chilli#
</code>

Now an ifconfig will show a "tun0" interface:
<code>
root@raspberrypi:/etc/chilli# ifconfig 
eth0      Link encap:Ethernet  HWaddr b8:27:eb:07:1b:9d  
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:24 errors:0 dropped:8 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:5760 (5.6 KiB)  TX bytes:50 (50.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1289 (1.2 KiB)  TX bytes:1289 (1.2 KiB)

tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:10.1.0.1  P-t-P:10.1.0.1  Mask:255.255.255.0
          UP POINTOPOINT RUNNING  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 80:1f:02:af:05:bb  
          inet addr:192.168.2.6  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2457 errors:0 dropped:3166 overruns:0 frame:0
          TX packets:1609 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:316351 (308.9 KiB)  TX bytes:260571 (254.4 KiB)

root@raspberrypi:/etc/chilli#
</code>

Now connect to WLAN of access-Point and navigate to a WWW Address. e.g. www.fox11.de\\
The coova loginpage should become visible.\\

In case NoScript ABE (Had that in Knoppix active by defaukt) is blocking the redirect, extent the \\
ABE SYSTEM configuration (Additional -> TAB ABE, view SYSTEM) to match the one below:

<code>
# Prevent Internet sites from requesting LAN resources.
Site LOCAL
Accept from LOCAL
# Allow proper Coova Chilli redirect
Site http://10.1.0.1:3390
Accept GET from http://10.1.0.1:3390/*
Deny
</code>
Log in with the via Easy-Hotspot Admin GUI created User e.g."user1" and the password assigned in 

[[f11:technik:raspberrypi:hotspotdm3kb:raspeasyhpdb#Create User via EasyHP Admin GUI|Create User via EasyHP Admin GUI]] 

If everything works fine you will be set free to surf the WWW



In case of probhlems, Debug chilli:\\

<code>
chilli --fg --debug
</code>



[[f11:technik:raspberrypi:hotspotdm3kb|Back to HotSpot Overview-Page]]