Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- f11:technik:raspberrypi:hotspotdm3kb:rasp1test [2014/12/05 08:34]
dm3kb angelegt
+++ f11:technik:raspberrypi:hotspotdm3kb:rasp1test [2019/09/29 12:03] (aktuell)
@@ Zeile 1: / Zeile 1: @@
+==== Start (Coova)-Chilli ====
+<code>
+root@raspberrypi:/etc/chilli# /etc/init.d/chilli start
+Starting chilli:
+root@raspberrypi:/etc/chilli#
+</code>
+Now an ifconfig will show a "tun0" interface:
+<code>
+root@raspberrypi:/etc/chilli# ifconfig
+eth0      Link encap:Ethernet  HWaddr b8:27:eb:07:1b:9d
+          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
+          RX packets:24 errors:0 dropped:8 overruns:0 frame:0
+          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:5760 (5.6 KiB)  TX bytes:50 (50.0 B)
+lo        Link encap:Local Loopback
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          UP LOOPBACK RUNNING  MTU:16436  Metric:1
+          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:0
+          RX bytes:1289 (1.2 KiB)  TX bytes:1289 (1.2 KiB)
+tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
+          inet addr:10.1.0.1  P-t-P:10.1.0.1  Mask:255.255.255.0
+          UP POINTOPOINT RUNNING  MTU:1500  Metric:1
+          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:100
+          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
+wlan0     Link encap:Ethernet  HWaddr 80:1f:02:af:05:bb
+          inet addr:192.168.2.6  Bcast:192.168.2.255  Mask:255.255.255.0
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:2457 errors:0 dropped:3166 overruns:0 frame:0
+          TX packets:1609 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:316351 (308.9 KiB)  TX bytes:260571 (254.4 KiB)
+root@raspberrypi:/etc/chilli#
+</code>
+Now connect to WLAN of access-Point and navigate to a WWW Address. e.g. www.fox11.de\\
+The coova loginpage should become visible.\\
+In case NoScript ABE (Had that in Knoppix active by defaukt) is blocking the redirect, extent the \\
+ABE SYSTEM configuration (Additional -> TAB ABE, view SYSTEM) to match the one below:
+<code>
+# Prevent Internet sites from requesting LAN resources.
+Site LOCAL
+Accept from LOCAL
+# Allow proper Coova Chilli redirect
+Site http://10.1.0.1:3390
+Accept GET from http://10.1.0.1:3390/*
+Deny
+</code>
+Log in with the via Easy-Hotspot Admin GUI created User e.g."user1" and the password assigned in
+[[f11:technik:raspberrypi:hotspotdm3kb:raspeasyhpdb#Create User via EasyHP Admin GUI|Create User via EasyHP Admin GUI]]
+If everything works fine you will be set free to surf the WWW
+In case of probhlems, Debug chilli:\\
+<code>
+chilli --fg --debug
+</code>
 [[f11:technik:raspberrypi:hotspotdm3kb|Back to HotSpot Overview-Page]]