Wiki des Amateurfunkclub Bad Homburg f11:technik:raspberrypi:hotspotdm3kb

f11:technik:raspberrypi:hotspotdm3kb:apacheserver

2019-09-29T12:03:53+00:00

The Apache HTTP Server Project is an effort to develop and maintain an open-source HTTP server for modern operating systems including UNIX and Windows NT. The goal of this project is to provide a secure, efficient and extensible server that provides HTTP services in sync with the current HTTP standards.

f11:technik:raspberrypi:hotspotdm3kb:rapbpwlancfg

2019-09-29T12:03:53+00:00

Check WLAN Status WLAN0: ip link show wlan0 SSID's to connect: iwlist wlan0 scan or iwlist wlan0 scan | grep Disable WLAN Power Saving (“Sleepmode”) To ensure that the WLAN is operational all the time and no „Power-Save“ is kicking the device out of the

f11:technik:raspberrypi:hotspotdm3kb:rasp1chterms

2019-09-29T12:03:53+00:00

Modify the "Terms and Conditions" page The „Terms and Conditions“ page is in English and may not matches to the „terms and Conditions“ you have in Mind for your Hot-Spot. Create a copy of /etc/chilli/www/terms.tmpl e.g. cp -p /etc/chilli/www/terms.tmpl /etc/chilli/www/orig_terms.tmpl

f11:technik:raspberrypi:hotspotdm3kb:rasp1logeasyhp

2019-09-29T12:03:53+00:00

https:/opt/local/web/easyhotspot/htdocs/index.php/auth/login.html better: https:/easyhotsport/index.php Default User/Pass: admin/admin123 Have a look into the EASY-Hotspot documentation: EASY Hotspot Dokumentation Ignore „ChilliSpot“ config as this is not used (We use CoovaChilly!!)

f11:technik:raspberrypi:hotspotdm3kb:rasp1test

2019-09-29T12:03:53+00:00

Start (Coova)-Chilli root@raspberrypi:/etc/chilli# /etc/init.d/chilli start Starting chilli: root@raspberrypi:/etc/chilli# Now an ifconfig will show a „tun0“ interface: root@raspberrypi:/etc/chilli# ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:07:1b:9d UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:24 errors:0 dropped:8 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuele…

f11:technik:raspberrypi:hotspotdm3kb:raspaddcont

2019-09-29T12:03:53+00:00

Radius Dictionary Enable Counter Conf vi /etc/freeradius/radiusd.conf Uncomment line: $INCLUDE sql/mysql/counter.conf Then further around line 710 in the instantiate section make sure you have: #chillispot_max_bytes max_all_mb noresetcounter

f11:technik:raspberrypi:hotspotdm3kb:raspapsetup

2019-09-29T12:03:53+00:00

CoovaChilli needs a bridge as Acces Point. With dd-wrt installed on the router this is possible. In dd-wrt configure the following: (1) Disable the DHCP Server Under Setup: Basic Setup DHCP Server Disable (2) Set your broadcast SSID Under Wireless: Basic Settings

f11:technik:raspberrypi:hotspotdm3kb:raspbchlang

2019-09-29T12:03:53+00:00

First config via GUI Connect Mouse and Key-Board via USB and HDMI to a Monitor. Enable SSH Server Extent Flash Card usage Optional PI User Password change Choose from "Internationalisation Options >> Change Keyboard Layout" Classmate PC as Keyboard and then "Other" to get a German Layout to select. Select German without any additionals. For the primary and langaue-Specific Keys choose "default" No - compose Key No - for "STRG + ALT + Del" to exit the X-Server

f11:technik:raspberrypi:hotspotdm3kb:raspbcoovac

2019-09-29T12:03:53+00:00

Get Cova Chilli 1.3.0 Source and validate, correct is: ca24ac274340c65a8e7ff704e6866a04380a87c444f261ba84097f0bd1c162e8 coova-chilli-1.3.0.tar.gz root@raspberrypi:~# wget http://ap.coova.org/chilli/coova-chilli-1.3.0.tar.gz --2014-02-15 22:37:09-- http://ap.coova.org/chilli/coova-chilli-1.3.0.tar.gz Resolving ap.coova.org (ap.coova.org)... 174.129.195.118 Connecting to ap.coova.org (ap.coova.org)|174.129.195.118|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently …

f11:technik:raspberrypi:hotspotdm3kb:raspbcoovai

2019-09-29T12:03:53+00:00

Install Coova-Chilly from the deb file (Coova Chilli Debian pakage) compiled previoisly . Use dpkg -i to install the package, after choosing default (keep current installed version) the error message is O.K. as coova-chilli is not properly configured yet.

f11:technik:raspberrypi:hotspotdm3kb:raspbeasyhpinst

2019-09-29T12:03:53+00:00

Prepare for EH installation apt-get update apt-get install php5 php5-common libapache2-mod-php5 php5-cgi php5-cli php5-mysql php-pear php5-gd php5-gmp php5-mcrypt php-db Check/Set PHP5 Config Check that „short_open_tag“ is set to „On“ in php.ini

f11:technik:raspberrypi:hotspotdm3kb:raspbhaserl

2019-09-29T12:03:53+00:00

To complile HASERL, which is a light-weight program to create cgi web scripts, so in other words a mini WEB-Server used by Coova-Chilly to present the login page. First get the sources to /usr/src/ e.g. using sftp check them: Calculate the sha256sum of this file and compare it to the one below.

f11:technik:raspberrypi:hotspotdm3kb:raspbmysql

2019-09-29T12:03:53+00:00

Install Support SW apt-get install debhelper libssl-dev libcurl4-gnutls-dev Install MySQL apt-get install mysql-server mysql-client php5-mysql Set MYSQL Root Password Type the MY-Sql Root Password twice ?????????? Reboot Reboot after installtion finished

f11:technik:raspberrypi:hotspotdm3kb:raspbpi

2019-09-29T12:03:53+00:00

Format the SD-Card before dumping and OS-Image to the card. If you are using an Unix OS everything can be done on command-line Insert the SD-Card into the Card-Reader of the Unix-Workstation. Issue the following commmand: df -h The output is a complete list of storage-media that is actual available on the work-station.

f11:technik:raspberrypi:hotspotdm3kb:raspbradius

2019-09-29T12:03:53+00:00

Install Free Radius and Free-Radius MYSQL apt-get install freeradius freeradius-mysql During Freeradius installation there is a point where Diffie-Hellmann (DH) parameters are generated this will take some time, so be pationed or just grep a cup of coffee

f11:technik:raspberrypi:hotspotdm3kb:raspchaustart

2019-09-29T12:03:53+00:00

To start up chilli during Raspberry boot use: root@raspberrypi:/etc/rc6.d# update-rc.d -f chilli defaults update-rc.d: using dependency based boot sequencing update-rc.d: warning: default start runlevel arguments (2 3 4 5) do not match chilli Default-Start values (2 3 5) update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match chilli Default-Stop values (none) root@raspberrypi:/etc/rc6.d#

f11:technik:raspberrypi:hotspotdm3kb:raspeasyhpdb

2019-09-29T12:03:53+00:00

Create Radius / Easyhotspot Database The FreeRadius radius_db must be the same as Easyhotspot database, so choose a name for the DB, here „easyhpradiusdb“ is used. Version1: Create DB named easyhpradiusdb, „fire and forget“ mode: echo "create database easyhpradiusdb;" | mysql -u root -p Enter password: ??

f11:technik:raspberrypi:hotspotdm3kb:rasplogging

2019-09-29T12:03:53+00:00

Logging Create a DropBox account and install the commandline tools for DropBox Create a directory for logs, e.g. /home/logging/logs and a script directory e.g. /home/logging/script Create the „houskeeping.pl“ script: #!/usr/bin/perl -w use warnings; my $debug =0; # Unix Commands my $ldate = "/bin/date"; my $lgrep = "/bin/grep"; my $lzgrep = "/bin/zgrep"; my $lhost = "/usr/bin/host"; my $lgzip = "/bin/gzip"; my $lzip = "/usr…